COMPARATIVE ANALYSIS OF THE EFFICIENCY OF DRILLING AND BLASTING AND EXPLOSION-FREE TECHNOLOGIES FOR DRIVING UNDERGROUND WORKINGS

Authors

  • Bakytbek Sabyrbekovich Sultanaliev Machinery researching and Аutomatics Institute of Kyrgyz Republic National Academy of Sciences
  • Ermamat Absamatov Machinery researching and Аutomatics Institute of Kyrgyz Republic National Academy of Sciences

Keywords:

Self-sufficiency; tunnel construction, alternative equipment and technology, jack-loading machine, non-explosive technology, hydraulic hammer, bucket, backhoe loader, boom, manipulator.

Abstract

This article describes the economic feasibility of the use of drilling-and-blasting and non-explosive tunnel boring technology with fender-flare units was estimated by the ratio of the cost of purchasing the used sets of equipment and consumables. A methodology has been developed for calculating the cost of the main operations of the tunneling cycle for drilling-and-blasting and non-explosive technologies for driving underground workings with a continuous face on hard rocks. Calculations were carried out for the main operations of drilling and blasting and non-blasting equipment and technologies for the development of hard rocks with a strength coefficient of 10-12 on the scale of prof. MM. Protodyakonov when driving underground workings with a continuous face. The conducted comparative analysis indicates the significant potential of non-explosive equipment and technology in terms of cost price, reduction in the duration of the tunneling cycle, and, consequently, an increase in the pace of tunneling operations.

References

Бексалов Е.Б. Мобильные гидрофицированные буровые и отбойно-оборочные агрегаты для проходки гидротехнических туннелей. Обоснование и создание конструкций, промышленная апробация и внедрение.: Автореф. дисс. доктора технических наук.-Фрунзе.1989-52с.

Макаров А.Б., Романов А.Н. Безвзрывная проходка горных выработок гидромолотами KRИРР // Подземное пространство мира. 1996. № 12. – С. 51-53.

https://articles/gidromolot/11828_obzor_produktovoy_lineyki_montabert_opisanie_i_harakteristiki. Дата обращения 20.03.2021г.

https://itcsa.com/index.php/fr/gamme-de-machines/itc-320-grande-machine. Дата обращения 15.03.2021г.

https://www.rocktechnology.sandvik/en/campaigns/sandvik-battery-powered-drill-rigs-make-the-change/. Дата обращения 18.03.2021г.

https://www.smetdlysmet.ru/gesn/%D0%93%D0%AD%D0%A1%D0%9D-29.pdf. Дата обращения 20.02.2021г

Султаналиев Б.С., Абсаматов Э.Н. Анализ циклограмм проходки подземных выработок по крепким трещиноватым породам при буровзрывной и безвзрывной техникой и технологией// Сб. науч. тр. ИМАШ. вып.2.Бишкек: Илим, 2020.С 106-114

Исследование эффективности применения и перспективы развития горнопроходческого оборудования в подземном строительстве. – М.: ТИМР, 1990. – 244 с.

СНиП 3.02.03-84 «Подземные горные выработки»

Бексалов Е.Б., Алымбаев Р.Т., Абсаматов Э.Н. Буровая установка СМГ-207М с гидроимпульсным механизмом “Импульс-9М”. Тез.докл. Всесоюзн. научно - практического совещания «Теоретические и технологические аспекты создания и применения силовых импульсных систем»- Караганда 1990 год.

Бексалов Е.Б., Абсаматов Э.Н., Бексалов И.E., Гарипов Ф.Р., Безвзрывная технология проходки по крепким породам и её технико-экономические показатели. Том III Машиноведение. Труды конференции с участием иностранных ученых. «Фундаментальные проблемы формирования техногенной геосреды» Сибирское отделение Российской академии наук Институт горного дела. г.Новосибирск, 2010.-С.30-35.

Published

2021-12-25