RECOMMENDATIONS FOR THE APPLICATION OF CYCLE-FLOW TECHNOLOGY IN THE DEVELOPMENT OF THE JEROOY GOLD DEPOSIT

Authors

  • KushbakaliTazhibaevich Tazhibaev Институт геомеханики и освоения недр НАН КР
  • Bubukan Kamardinovna Karabaeva Institute of Geomechanics and development of bowelsof the Na-tional Academy of Sciences of the Kyrgyz Republic
  • Daniyar Kushbakalievich Tazhibaev Institute of Geomechanics and development of bowelsof the Na-tional Academy of Sciences of the Kyrgyz Republic

Keywords:

Key words: mine, cyclic-flow technology, ore, overburden rock, conveyor, deposit, transportation, crushing and sorting complex, dump.

Abstract

The general recommendations on the use of cyclic-flow technologies in the open-pit mining of the Jerooy gold deposit are presented in the article. In particular, the recommendations on the choice of open-pit equipment for efficient overburden mining are given in the article, and also the feasibility of transporting and dumping overburden rocks using flow conveyor transport is substantiated. The advantage of cyclic-flow technology in the open-pit mining of the Jerooy mine, which will increase economic indicators and significantly improve the environmental situation at the mine due to a sharp reduction of harmful emissions in case of refusing from motor transport, and also raise the safety during transportation and dumping of rock mass in mountainous areas is shown.

References

ТЭО целесообразности отработки месторождения Джеруй. ЗАО ГПК «Азиярудпроект». – Б., 2007. - 388 с.

Спиваковский A. O. Ленточные конвейеры в горной промышленности. - M., 1982. - 115 с.

Шешко Е.Е. Горно-транспортные машины и оборудование для открытых работ. - М.: Изд-во МГГУ, 2003. -195 с.

Экскаватор ЭКГ-5а, основные технические характеристикии [Электронный ресурс] . - URL: //uzgm.ru/komplektatsiya/osnovnye-tekhnicheskie-kharakteristiki-/(дата обращения 28.03.2022).

Published

2022-09-20

Issue

Section

MECHANICAL ENGINEERING

Categories