IMPROVEMENT OF DESIGN SOLUTIONS OF THE IMPACT ASSEMBLY OF THE JACKHAMMER

Authors

  • Murat Sadyrbekovich Dzhumatayev Machinery researching and Аutomatics Institute of Kyrgyz Republic National Academy of Sciences
  • Altynbek Jakypbekovich Bayaliev Kyrgyz Civil Engineering Institute named after. N. Isanova

Keywords:

double-crank-slider impact mechanism of variable structure, jackhammer, laboratory and field tests

Abstract

In this article presents the results of laboratory and field tests of a jackhammer with a two-crank-slider mechanism of variable structure. As a result of
the tests, shortcomings in the design of the jackhammer were revealed. Technical
solutions are considered that make it possible to separate the shock mass from
the drive lever mechanism. It is shown that the most efficient of them is the impact
mechanism with a split slider with an air cushion. The air cushion has a positive
effect on the dynamics, in particular, the negative effect of shock loads on the
drive and on the links of the percussion mechanism is reduced. A new scheme of
a crank-slider mechanism with a separating slider is proposed. According to the
proposed new scheme of the impact unit, a design of a jackhammer with a split
slider with an air cushion has been developed. The design features of a jackhammer with a split slider are reflected.

References

Баялиев А.Ж., Акчалов А. Методика проведения экспериментальных исследований отбойного молота с двухкривошипно-ползунным ударным механизмом. – Машиноведение. – Вып. 2. – Бишкек: Илим, 2015. – С. 12–18.

Каримбаев Т.Т., Баялиев А.Ж. Результаты экспериментальных испытаний отбойного молота с двухкривошипно-ползунным механизмом переменной структуры с воздушной подушкой. – Машиноведение. – Вып. 2.– Бишкек: Илим, 2015. – С. 19–23.

Джуматаев М.С., Абдрахманов И.А., Уркунов З.А. Шарнирно - рычажные ударные механизмы с кинематической развязкой ударного узла. – Бишкек: Илим, 2007.

Джуматаев М.С., Каримбаев Т.Т., Баялиев А.Ж. Ударные механизмы с разделяющимся бойком. – Бишкек: Илим, 2015. – 137 с.

Джуматаев М.С., Каримбаев Т.Т., Уркунов З.А., Баялиев А.Ж. Двухкривошипно - ползунный ударный механизм с воздушной подушкой/ Сб. научных трудов Института машиноведения. – Вып. 5. – Бишкек: Илим, 2006. – С.20 – 25.

Джуматаев М.С., Уркунов З.А., Баялиев А.Ж. Молот с воздушной подушкой/ Сб. научных трудов Института машиноведения. – Вып. 6. – Бишкек: Илим, 2008. – С. 65–70.

Уркунов З.А. Фокин Ю.А. Абидов А.О. Анализ причин возникновения экспериментальных усилий и поломок ручных ударных машин с шарнирным четырехзвенным ударным механизмом // Механизмы переменной структуры и виброударные машины: Материалы международной конференции. – Бишкек, 1999. – С. 278 – 284.

Published

2023-08-01